dmesg - Fedora 27 Ryzen 1800x Gigabyte Gaming 5 Quiet N Cool disabled
Linux version 4.15.6-300.fc27.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 7.3.1 20180130 (Red Hat 7.3.1-2) (GCC)) #1 SMP Mon Feb 26 18:43:03 UTC 2018
Command line: BOOT_IMAGE=/vmlinuz-4.15.6-300.fc27.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_US.UTF-8
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
BIOS-e820: [mem 0x000000000400a000-0x0000000009cfffff] usable
BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x00000000db9fbfff] usable
BIOS-e820: [mem 0x00000000db9fc000-0x00000000dbb72fff] reserved
BIOS-e820: [mem 0x00000000dbb73000-0x00000000dbc6efff] usable
BIOS-e820: [mem 0x00000000dbc6f000-0x00000000dc04dfff] ACPI NVS
BIOS-e820: [mem 0x00000000dc04e000-0x00000000dcebffff] reserved
BIOS-e820: [mem 0x00000000dcec0000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000101f37ffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x9f9a9018-0x9f9ba057] usable ==> usable
e820: update [mem 0x9f9a9018-0x9f9ba057] usable ==> usable
e820: update [mem 0x9f99c018-0x9f9a8057] usable ==> usable
e820: update [mem 0x9f99c018-0x9f9a8057] usable ==> usable
e820: update [mem 0x9f97e018-0x9f99b057] usable ==> usable
e820: update [mem 0x9f97e018-0x9f99b057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000003ffffff] usable
reserve setup_data: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
reserve setup_data: [mem 0x000000000400a000-0x0000000009cfffff] usable
reserve setup_data: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000affffff] usable
reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
reserve setup_data: [mem 0x000000000b020000-0x000000009f97e017] usable
reserve setup_data: [mem 0x000000009f97e018-0x000000009f99b057] usable
reserve setup_data: [mem 0x000000009f99b058-0x000000009f99c017] usable
reserve setup_data: [mem 0x000000009f99c018-0x000000009f9a8057] usable
reserve setup_data: [mem 0x000000009f9a8058-0x000000009f9a9017] usable
reserve setup_data: [mem 0x000000009f9a9018-0x000000009f9ba057] usable
reserve setup_data: [mem 0x000000009f9ba058-0x00000000db9fbfff] usable
reserve setup_data: [mem 0x00000000db9fc000-0x00000000dbb72fff] reserved
reserve setup_data: [mem 0x00000000dbb73000-0x00000000dbc6efff] usable
reserve setup_data: [mem 0x00000000dbc6f000-0x00000000dc04dfff] ACPI NVS
reserve setup_data: [mem 0x00000000dc04e000-0x00000000dcebffff] reserved
reserve setup_data: [mem 0x00000000dcec0000-0x00000000deffffff] usable
reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000101f37ffff] usable
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0xdbc6f000 ACPI=0xdbc6f000 SMBIOS=0xdcd85000 SMBIOS 3.0=0xdcd84000 ESRT=0xda2fa898
secureboot: Secure boot disabled
random: fast init done
SMBIOS 3.1.1 present.
DMI: Gigabyte Technology Co., Ltd. AX370-Gaming 5/AX370-Gaming 5, BIOS F22b 02/13/2018
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x101f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000001020000000 aka 66048M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000da2fa898 to 0x00000000da2fa8d0.
Base memory trampoline at [ (ptrval)] 96000 size 24576
Using GB pages for direct mapping
BRK [0x6ca6e000, 0x6ca6efff] PGTABLE
BRK [0x6ca6f000, 0x6ca6ffff] PGTABLE
BRK [0x6ca70000, 0x6ca70fff] PGTABLE
BRK [0x6ca71000, 0x6ca71fff] PGTABLE
BRK [0x6ca72000, 0x6ca72fff] PGTABLE
BRK [0x6ca73000, 0x6ca73fff] PGTABLE
BRK [0x6ca74000, 0x6ca74fff] PGTABLE
BRK [0x6ca75000, 0x6ca75fff] PGTABLE
BRK [0x6ca76000, 0x6ca76fff] PGTABLE
BRK [0x6ca77000, 0x6ca77fff] PGTABLE
BRK [0x6ca78000, 0x6ca78fff] PGTABLE
RAMDISK: [mem 0x3c771000-0x3e19cfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DBC6F000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DBC6F098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DBC75950 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170831/tbfadt-658)
ACPI: DSDT 0x00000000DBC6F1D8 006772 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DC036E00 000040
ACPI: APIC 0x00000000DBC75A68 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DBC75B48 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DBC75B90 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DBC75C30 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: CRAT 0x00000000DBC7E8C8 000F50 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DBC7F818 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DBC7F848 002E6E (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000DBC826B8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000DBC826F8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000DBC82730 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DBC82758 000042 (v01 00000000 00000000)
ACPI: BGRT 0x00000000DBC827A0 000038 (v01 ALASKA ALASKA 01072009 AMI 00010013)
ACPI: IVRS 0x00000000DBC827D8 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 0x00000000DBC828A8 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: SSDT 0x00000000DBC829A0 001993 (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: WSMT 0x00000000DBC84338 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000101f37ffff]
NODE_DATA(0) allocated [mem 0x101f355000-0x101f37ffff]
tsc: Fast TSC calibration failed
tsc: Using PIT calibration value
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000101f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000003ffffff]
node 0: [mem 0x000000000400a000-0x0000000009cfffff]
node 0: [mem 0x000000000a000000-0x000000000affffff]
node 0: [mem 0x000000000b020000-0x00000000db9fbfff]
node 0: [mem 0x00000000dbb73000-0x00000000dbc6efff]
node 0: [mem 0x00000000dcec0000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000101f37ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000101f37ffff]
On node 0 totalpages: 16763949
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 14117 pages used for memmap
DMA32 zone: 903438 pages, LIFO batch:31
Normal zone: 247758 pages used for memmap
Normal zone: 15856512 pages, LIFO batch:31
Reserved but unavailable: 97 pages
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x04000000-0x04009fff]
PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: Registered nosave memory: [mem 0x9f97e000-0x9f97efff]
PM: Registered nosave memory: [mem 0x9f99b000-0x9f99bfff]
PM: Registered nosave memory: [mem 0x9f99c000-0x9f99cfff]
PM: Registered nosave memory: [mem 0x9f9a8000-0x9f9a8fff]
PM: Registered nosave memory: [mem 0x9f9a9000-0x9f9a9fff]
PM: Registered nosave memory: [mem 0x9f9ba000-0x9f9bafff]
PM: Registered nosave memory: [mem 0xdb9fc000-0xdbb72fff]
PM: Registered nosave memory: [mem 0xdbc6f000-0xdc04dfff]
PM: Registered nosave memory: [mem 0xdc04e000-0xdcebffff]
PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:1024 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 44 pages/cpu @ (ptrval) s143360 r8192 d28672 u262144
pcpu-alloc: s143360 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 16501984
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.15.6-300.fc27.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_US.UTF-8
Memory: 65742280K/67055796K available (12300K kernel code, 1561K rwdata, 3780K rodata, 2108K init, 1368K bss, 1313516K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 36026 entries in 141 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=16.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 65792, nr_irqs: 1096, preallocated irqs: 16
Offload RCU callbacks from CPUs: .
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20170831
ACPI: 6 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3592.676 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7185.35 BogoMIPS (lpj=3592676)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 23 MCE banks
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V2 : Mitigation: Full AMD retpoline
Freeing SMP alternatives memory: 36K
smpboot: CPU0: AMD Ryzen 7 1800X Eight-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
Performance Events: Fam17h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 16 processors activated (114965.63 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0xdbc6f000-0xdc04dfff] (4059136 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 21:16:03, date: 03/08/18
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1520543762.048:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
pci 0000:01:00.0: [1022:43b9] type 00 class 0x0c0330
pci 0000:01:00.0: reg 0x10: [mem 0xfe4a0000-0xfe4a7fff 64bit]
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:01:00.1: [1022:43b5] type 00 class 0x010601
pci 0000:01:00.1: reg 0x24: [mem 0xfe480000-0xfe49ffff]
pci 0000:01:00.1: reg 0x30: [mem 0xfe400000-0xfe47ffff pref]
pci 0000:01:00.1: PME# supported from D3hot D3cold
pci 0000:01:00.2: [1022:43b0] type 01 class 0x060400
pci 0000:01:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 01-06]
pci 0000:00:01.3: bridge window [io 0xd000-0xefff]
pci 0000:00:01.3: bridge window [mem 0xfe100000-0xfe4fffff]
pci 0000:02:00.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:02.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:02.0: PME# supported from D3hot D3cold
pci 0000:02:03.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:03.0: PME# supported from D3hot D3cold
pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:04.0: PME# supported from D3hot D3cold
pci 0000:01:00.2: PCI bridge to [bus 02-06]
pci 0000:01:00.2: bridge window [io 0xd000-0xefff]
pci 0000:01:00.2: bridge window [mem 0xfe100000-0xfe3fffff]
pci 0000:03:00.0: [1b21:1343] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:04:00.0: [8086:1539] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xfe200000-0xfe21ffff]
pci 0000:04:00.0: reg 0x18: [io 0xe000-0xe01f]
pci 0000:04:00.0: reg 0x1c: [mem 0xfe220000-0xfe223fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:02.0: PCI bridge to [bus 04]
pci 0000:02:02.0: bridge window [io 0xe000-0xefff]
pci 0000:02:02.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:05:00.0: [1969:e0b1] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xfe100000-0xfe13ffff 64bit]
pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:03.0: PCI bridge to [bus 05]
pci 0000:02:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:02:03.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:02:04.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [1002:67df] type 00 class 0x030000
pci 0000:07:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:07:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:07:00.0: reg 0x20: [io 0xf000-0xf0ff]
pci 0000:07:00.0: reg 0x24: [mem 0xfe900000-0xfe93ffff]
pci 0000:07:00.0: reg 0x30: [mem 0xfe940000-0xfe95ffff pref]
pci 0000:07:00.0: BAR 0: assigned to efifb
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:07:00.1: [1002:aaf0] type 00 class 0x040300
pci 0000:07:00.1: reg 0x10: [mem 0xfe960000-0xfe963fff 64bit]
pci 0000:07:00.1: supports D1 D2
pci 0000:00:03.1: PCI bridge to [bus 07]
pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:08:00.0: [1022:145a] type 00 class 0x130000
pci 0000:08:00.0: enabling Extended Tags
pci 0000:08:00.2: [1022:1456] type 00 class 0x108000
pci 0000:08:00.2: reg 0x18: [mem 0xfe600000-0xfe6fffff]
pci 0000:08:00.2: reg 0x24: [mem 0xfe700000-0xfe701fff]
pci 0000:08:00.2: enabling Extended Tags
pci 0000:08:00.3: [1022:145c] type 00 class 0x0c0330
pci 0000:08:00.3: reg 0x10: [mem 0xfe500000-0xfe5fffff 64bit]
pci 0000:08:00.3: enabling Extended Tags
pci 0000:08:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:07.1: PCI bridge to [bus 08]
pci 0000:00:07.1: bridge window [mem 0xfe500000-0xfe7fffff]
pci 0000:09:00.0: [1022:1455] type 00 class 0x130000
pci 0000:09:00.0: enabling Extended Tags
pci 0000:09:00.2: [1022:7901] type 00 class 0x010601
pci 0000:09:00.2: reg 0x24: [mem 0xfe808000-0xfe808fff]
pci 0000:09:00.2: enabling Extended Tags
pci 0000:09:00.2: PME# supported from D3hot D3cold
pci 0000:09:00.3: [1022:1457] type 00 class 0x040300
pci 0000:09:00.3: reg 0x10: [mem 0xfe800000-0xfe807fff]
pci 0000:09:00.3: enabling Extended Tags
pci 0000:09:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 09]
pci 0000:00:08.1: bridge window [mem 0xfe800000-0xfe8fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
pci 0000:07:00.0: vgaarb: setting as boot VGA device
pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:07:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0x9f97e018-0x9fffffff]
e820: reserve RAM buffer [mem 0x9f99c018-0x9fffffff]
e820: reserve RAM buffer [mem 0x9f9a9018-0x9fffffff]
e820: reserve RAM buffer [mem 0xdb9fc000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdbc6f000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x101f380000-0x101fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0a00-0x0a2f] has been reserved
system 00:03: [io 0x0a30-0x0a3f] has been reserved
system 00:03: [io 0x0a40-0x0a4f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x040b] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c51] has been reserved
system 00:04: [io 0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0800-0x089f] has been reserved
system 00:04: [io 0x0b00-0x0b0f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0900-0x090f] has been reserved
system 00:04: [io 0x0910-0x091f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:02:02.0: PCI bridge to [bus 04]
pci 0000:02:02.0: bridge window [io 0xe000-0xefff]
pci 0000:02:02.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:02:03.0: PCI bridge to [bus 05]
pci 0000:02:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:02:03.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:02:04.0: PCI bridge to [bus 06]
pci 0000:01:00.2: PCI bridge to [bus 02-06]
pci 0000:01:00.2: bridge window [io 0xd000-0xefff]
pci 0000:01:00.2: bridge window [mem 0xfe100000-0xfe3fffff]
pci 0000:00:01.3: PCI bridge to [bus 01-06]
pci 0000:00:01.3: bridge window [io 0xd000-0xefff]
pci 0000:00:01.3: bridge window [mem 0xfe100000-0xfe4fffff]
pci 0000:00:03.1: PCI bridge to [bus 07]
pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 08]
pci 0000:00:07.1: bridge window [mem 0xfe500000-0xfe7fffff]
pci 0000:00:08.1: PCI bridge to [bus 09]
pci 0000:00:08.1: bridge window [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xd000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe100000-0xfe4fffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfe100000-0xfe3fffff]
pci_bus 0000:03: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:07: resource 0 [io 0xf000-0xffff]
pci_bus 0000:07: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:07: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0xfe500000-0xfe7fffff]
pci_bus 0000:09: resource 1 [mem 0xfe800000-0xfe8fffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:07:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 26800K
AMD-Vi: IOMMU performance counters supported
iommu: Adding device 0000:00:01.0 to group 0
iommu: Adding device 0000:00:01.3 to group 1
iommu: Adding device 0000:00:02.0 to group 2
iommu: Adding device 0000:00:03.0 to group 3
iommu: Adding device 0000:00:03.1 to group 4
iommu: Adding device 0000:00:04.0 to group 5
iommu: Adding device 0000:00:07.0 to group 6
iommu: Adding device 0000:00:07.1 to group 7
iommu: Adding device 0000:00:08.0 to group 8
iommu: Adding device 0000:00:08.1 to group 9
iommu: Adding device 0000:00:14.0 to group 10
iommu: Adding device 0000:00:14.3 to group 10
iommu: Adding device 0000:00:18.0 to group 11
iommu: Adding device 0000:00:18.1 to group 11
iommu: Adding device 0000:00:18.2 to group 11
iommu: Adding device 0000:00:18.3 to group 11
iommu: Adding device 0000:00:18.4 to group 11
iommu: Adding device 0000:00:18.5 to group 11
iommu: Adding device 0000:00:18.6 to group 11
iommu: Adding device 0000:00:18.7 to group 11
iommu: Adding device 0000:01:00.0 to group 12
iommu: Adding device 0000:01:00.1 to group 12
iommu: Adding device 0000:01:00.2 to group 12
iommu: Adding device 0000:02:00.0 to group 12
iommu: Adding device 0000:02:02.0 to group 12
iommu: Adding device 0000:02:03.0 to group 12
iommu: Adding device 0000:02:04.0 to group 12
iommu: Adding device 0000:03:00.0 to group 12
iommu: Adding device 0000:04:00.0 to group 12
iommu: Adding device 0000:05:00.0 to group 12
iommu: Adding device 0000:07:00.0 to group 13
iommu: Using direct mapping for device 0000:07:00.0
iommu: Adding device 0000:07:00.1 to group 13
iommu: Adding device 0000:08:00.0 to group 14
iommu: Adding device 0000:08:00.2 to group 15
iommu: Adding device 0000:08:00.3 to group 16
iommu: Adding device 0000:09:00.0 to group 17
iommu: Adding device 0000:09:00.2 to group 18
iommu: Adding device 0000:09:00.3 to group 19
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0xf77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=24 bucket_order=0
zbud: loaded
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:01.3: AER enabled with IRQ 28
pcieport 0000:00:03.1: AER enabled with IRQ 29
pcieport 0000:00:07.1: AER enabled with IRQ 30
pcieport 0000:00:08.1: AER enabled with IRQ 31
pcieport 0000:00:01.3: Signaling PME with IRQ 28
pcieport 0000:00:03.1: Signaling PME with IRQ 29
pcieport 0000:00:07.1: Signaling PME with IRQ 30
pcieport 0000:00:08.1: Signaling PME with IRQ 31
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:01:00.1: version 3.0
ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480100 irq 39
ata2: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480180 irq 39
ata3: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480200 irq 39
ata4: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480280 irq 39
ata5: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480300 irq 39
ata6: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480380 irq 39
ata7: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480400 irq 39
ata8: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480480 irq 39
ahci 0000:09:00.2: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:09:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs
ahci 0000:09:00.2: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
scsi host8: ahci
scsi host9: ahci
ata9: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808100 irq 41
ata10: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808180 irq 42
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000418
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.6-300.fc27.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:01:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.6-300.fc27.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:01:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:03:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.15.6-300.fc27.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:03:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.15.6-300.fc27.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:03:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.3: xHCI Host Controller
xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:08:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000418
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.15.6-300.fc27.x86_64 xhci-hcd
usb usb5: SerialNumber: 0000:08:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:08:00.3: xHCI Host Controller
xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.15.6-300.fc27.x86_64 xhci-hcd
usb usb6: SerialNumber: 0000:08:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08001129
microcode: CPU1: patch_level=0x08001129
microcode: CPU2: patch_level=0x08001129
microcode: CPU3: patch_level=0x08001129
microcode: CPU4: patch_level=0x08001129
microcode: CPU5: patch_level=0x08001129
microcode: CPU6: patch_level=0x08001129
microcode: CPU7: patch_level=0x08001129
microcode: CPU8: patch_level=0x08001129
microcode: CPU9: patch_level=0x08001129
microcode: CPU10: patch_level=0x08001129
microcode: CPU11: patch_level=0x08001129
microcode: CPU12: patch_level=0x08001129
microcode: CPU13: patch_level=0x08001129
microcode: CPU14: patch_level=0x08001129
microcode: CPU15: patch_level=0x08001129
microcode: Microcode Update Driver: v2.2.
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (640511381, 0)->(749473572, -108962191)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: be1a4ad639e889cd5f3a93baef1020c030702902'
Loaded UEFI:MokListRT cert 'Fedora Secure Boot CA: fde32599c2d61db1bf5807335d7b20e4cd963b42' linked to secondary sys keyring
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
Magic number: 10:529:297
rtc_cmos 00:02: setting system clock to 2018-03-08 21:16:03 UTC (1520543763)
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
usb 5-4: new high-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: TOSHIBA DT01ACA300, MX6OABB0, max UDMA/133
ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA3 ABB0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 5-4: New USB device found, idVendor=0409, idProduct=005a
usb 5-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 5-4:1.0: USB hub found
hub 5-4:1.0: 4 ports detected
usb 5-4.3: new full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
tsc: Refined TSC clocksource calibration: 3593.248 MHz
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cb68e6ea4, max_idle_ns: 440795288133 ns
ata2.00: ATA-9: WDC WDS120G1G0A-00SS50, Z3311000, max UDMA/133
ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WDS120G1G0A- 1000 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 5-4.3: New USB device found, idVendor=0557, idProduct=8021
usb 5-4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 5-4.3:1.0: USB hub found
hub 5-4.3:1.0: 4 ports detected
usb 1-5: new high-speed USB device number 2 using xhci_hcd
usb 5-4.3.1: new low-speed USB device number 4 using xhci_hcd
usb 1-5: New USB device found, idVendor=2109, idProduct=2813
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB2.0 Hub
usb 1-5: Manufacturer: VIA Labs, Inc.
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 5-4.3.1: New USB device found, idVendor=04ca, idProduct=0040
usb 5-4.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-4.3.1: Product: HP USB Multimedia Keyboard
usb 5-4.3.1: Manufacturer: LiteOn
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
input: LiteOn HP USB Multimedia Keyboard as /devices/pci0000:00/0000:00:07.1/0000:08:00.3/usb5/5-4/5-4.3/5-4.3.1/5-4.3.1:1.0/0003:04CA:0040.0001/input/input2
ata3.00: ATA-7: WDC WD5000YS-01MPB1, 09.02E09, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD5000YS-01M 2E09 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg2 type 0
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
hid-generic 0003:04CA:0040.0001: input,hidraw0: USB HID v1.10 Keyboard [LiteOn HP USB Multimedia Keyboard] on usb-0000:08:00.3-4.3.1/input0
usb 1-14: new high-speed USB device number 3 using xhci_hcd
input: LiteOn HP USB Multimedia Keyboard as /devices/pci0000:00/0000:00:07.1/0000:08:00.3/usb5/5-4/5-4.3/5-4.3.1/5-4.3.1:1.1/0003:04CA:0040.0002/input/input3
hid-generic 0003:04CA:0040.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [LiteOn HP USB Multimedia Keyboard] on usb-0000:08:00.3-4.3.1/input1
input: LiteOn HP USB Multimedia Keyboard as /devices/pci0000:00/0000:00:07.1/0000:08:00.3/usb5/5-4/5-4.3/5-4.3.1/5-4.3.1:1.2/0003:04CA:0040.0003/input/input4
hid-generic 0003:04CA:0040.0003: input,hidraw2: USB HID v1.10 Mouse [LiteOn HP USB Multimedia Keyboard] on usb-0000:08:00.3-4.3.1/input2
usb 1-14: New USB device found, idVendor=058f, idProduct=6364
usb 1-14: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-14: Product: Mass Storage Device
usb 1-14: Manufacturer: Generic
usb 1-14: SerialNumber: 058F63646476
hid-generic 0003:058F:6364.0004: hiddev97,hidraw3: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:01:00.0-14/input1
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: DRW-24F1ST d, 1.00, max UDMA/133
ata4.00: configured for UDMA/133
scsi 3:0:0:0: CD-ROM ASUS DRW-24F1ST d 1.00 PQ: 0 ANSI: 5
clocksource: Switched to clocksource tsc
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg3 type 5
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 2108K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 2012K
Freeing unused kernel memory: 316K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Reached target Local File Systems.
systemd[1]: Reached target Swap.
systemd[1]: Reached target Timers.
audit: type=1130 audit(1520543766.584:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520543766.614:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520543766.636:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520543766.637:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1520543766.637:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520543766.651:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520543766.656:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520543766.705:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb-storage 1-14:1.0: USB Mass Storage device detected
scsi host10: usb-storage 1-14:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
audit: type=1130 audit(1520543766.719:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
dca service started, version 1.12.1
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
alx 0000:05:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [1c:1b:0d:ed:9b:3f]
PTP clock support registered
alx 0000:05:00.0 enp5s0: renamed from eth0
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
Found CRAT image with size=3920
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=16 id_base=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=14
Found cache entry in CRAT table with processor_id=14
Found cache entry in CRAT table with processor_id=14
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1462:0x3418 0xE7).
[drm] register mmio base: 0xFE900000
[drm] register mmio size: 262144
[drm] probing gen 2 caps for device 1022:1453 = 737903/e
[drm] probing mlw for device 1022:1453 = 737903
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
amdgpu 0000:07:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
[drm] GPU post is not needed
[drm] vm size is 64 GB, block size is 13-bit, fragment size is 9-bit
amdgpu 0000:07:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
amdgpu 0000:07:00.0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 32990392 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400040000).
amdgpu 0000:07:00.0: amdgpu: using MSI.
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] amdgpu: irq initialized.
amdgpu: [powerplay] amdgpu: powerplay sw initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD6
[drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DP-2
[drm] HPD4
[drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] HDMI-A-2
[drm] HPD5
[drm] DDC: 0x4874 0x4874 0x4875 0x4875 0x4876 0x4876 0x4877 0x4877
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY1
[drm] Connector 4:
[drm] DVI-D-1
[drm] HPD3
[drm] DDC: 0x487c 0x487c 0x487d 0x487d 0x487e 0x487e 0x487f 0x487f
[drm] Encoders:
[drm] DFP5: INTERNAL_UNIPHY
[drm] Chained IB support enabled!
amdgpu 0000:07:00.0: fence driver on ring 0 use gpu addr 0x0000000000400040, cpu addr 0x00000000ae5d1cbf
amdgpu 0000:07:00.0: fence driver on ring 1 use gpu addr 0x00000000004000c0, cpu addr 0x00000000fe83302c
amdgpu 0000:07:00.0: fence driver on ring 2 use gpu addr 0x0000000000400140, cpu addr 0x00000000c1f99e4c
amdgpu 0000:07:00.0: fence driver on ring 3 use gpu addr 0x00000000004001c0, cpu addr 0x000000005b4d4078
amdgpu 0000:07:00.0: fence driver on ring 4 use gpu addr 0x0000000000400240, cpu addr 0x00000000cded42f4
amdgpu 0000:07:00.0: fence driver on ring 5 use gpu addr 0x00000000004002c0, cpu addr 0x0000000085b4a4e1
amdgpu 0000:07:00.0: fence driver on ring 6 use gpu addr 0x0000000000400340, cpu addr 0x00000000a908e437
amdgpu 0000:07:00.0: fence driver on ring 7 use gpu addr 0x00000000004003c0, cpu addr 0x00000000b47e6a60
amdgpu 0000:07:00.0: fence driver on ring 8 use gpu addr 0x0000000000400440, cpu addr 0x0000000066cd2137
amdgpu 0000:07:00.0: fence driver on ring 9 use gpu addr 0x00000000004004e0, cpu addr 0x00000000f8b01277
amdgpu 0000:07:00.0: fence driver on ring 10 use gpu addr 0x0000000000400560, cpu addr 0x0000000008546ef2
amdgpu 0000:07:00.0: fence driver on ring 11 use gpu addr 0x00000000004005e0, cpu addr 0x00000000901846bb
[drm] Found UVD firmware Version: 1.79 Family ID: 16
amdgpu 0000:07:00.0: fence driver on ring 12 use gpu addr 0x000000f4001e6420, cpu addr 0x00000000a98fd230
amdgpu 0000:07:00.0: fence driver on ring 13 use gpu addr 0x00000000004006e0, cpu addr 0x0000000087d0fb02
amdgpu 0000:07:00.0: fence driver on ring 14 use gpu addr 0x0000000000400760, cpu addr 0x0000000067def5f8
[drm] Found VCE firmware Version: 52.4 Binary ID: 3
amdgpu 0000:07:00.0: fence driver on ring 15 use gpu addr 0x00000000004007e0, cpu addr 0x00000000c7786c4f
amdgpu 0000:07:00.0: fence driver on ring 16 use gpu addr 0x0000000000400860, cpu addr 0x000000005879ba16
[drm] ring test on 0 succeeded in 11 usecs
[drm] ring test on 9 succeeded in 7 usecs
[drm] ring test on 1 succeeded in 7 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 5 usecs
[drm] ring test on 6 succeeded in 2 usecs
[drm] ring test on 7 succeeded in 2 usecs
[drm] ring test on 8 succeeded in 2 usecs
[drm] ring test on 10 succeeded in 3 usecs
[drm] ring test on 11 succeeded in 5 usecs
[drm] ring test on 12 succeeded in 1 usecs
[drm] ring test on 13 succeeded in 13 usecs
[drm] ring test on 14 succeeded in 3 usecs
[drm] UVD and UVD ENC initialized successfully.
pps pps0: new PPS source ptp0
igb 0000:04:00.0: added PHC on eth0
igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 1c:1b:0d:ed:9b:3e
igb 0000:04:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:04:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:04:00.0 enp4s0: renamed from eth0
[drm] ring test on 15 succeeded in 5 usecs
[drm] ring test on 16 succeeded in 2 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] ib test on ring 13 succeeded
[drm] ib test on ring 14 succeeded
[drm] ib test on ring 15 succeeded
[drm] fb mappable at 0xE03F0000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
scsi 10:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
scsi 10:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
scsi 10:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
scsi 10:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
sd 10:0:0:0: Attached scsi generic sg4 type 0
sd 10:0:0:1: Attached scsi generic sg5 type 0
sd 10:0:0:2: Attached scsi generic sg6 type 0
sd 10:0:0:3: Attached scsi generic sg7 type 0
sd 10:0:0:1: [sde] Attached SCSI removable disk
sd 10:0:0:2: [sdf] Attached SCSI removable disk
sd 10:0:0:0: [sdd] Attached SCSI removable disk
sd 10:0:0:3: [sdg] Attached SCSI removable disk
Console: switching to colour frame buffer device 240x67
amdgpu 0000:07:00.0: fb0: amdgpudrmfb frame buffer device
amdgpu 0000:07:00.0: kfd not supported on this ASIC
[drm] Initialized amdgpu 3.23.0 20150101 for 0000:07:00.0 on minor 0
random: crng init done
audit: type=1130 audit(1520543768.279:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520543770.530:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1520543770.598:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1520543770.598:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520543770.721:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1520543770.725:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520543770.725:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1520543770.725:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520543770.725:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1520543770.725:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[321]: Received SIGTERM from PID 1 (systemd).
systemd: 17 output lines suppressed due to ratelimiting
SELinux: 32768 avtab hash slots, 108455 rules.
SELinux: 32768 avtab hash slots, 108455 rules.
SELinux: 8 users, 14 roles, 5090 types, 316 bools, 1 sens, 1024 cats
SELinux: 97 classes, 108455 rules
SELinux: Permission getrlimit in class process not defined in policy.
SELinux: Class sctp_socket not defined in policy.
SELinux: Class icmp_socket not defined in policy.
SELinux: Class ax25_socket not defined in policy.
SELinux: Class ipx_socket not defined in policy.
SELinux: Class netrom_socket not defined in policy.
SELinux: Class atmpvc_socket not defined in policy.
SELinux: Class x25_socket not defined in policy.
SELinux: Class rose_socket not defined in policy.
SELinux: Class decnet_socket not defined in policy.
SELinux: Class atmsvc_socket not defined in policy.
SELinux: Class rds_socket not defined in policy.
SELinux: Class irda_socket not defined in policy.
SELinux: Class pppox_socket not defined in policy.
SELinux: Class llc_socket not defined in policy.
SELinux: Class can_socket not defined in policy.
SELinux: Class tipc_socket not defined in policy.
SELinux: Class bluetooth_socket not defined in policy.
SELinux: Class iucv_socket not defined in policy.
SELinux: Class rxrpc_socket not defined in policy.
SELinux: Class isdn_socket not defined in policy.
SELinux: Class phonet_socket not defined in policy.
SELinux: Class ieee802154_socket not defined in policy.
SELinux: Class caif_socket not defined in policy.
SELinux: Class alg_socket not defined in policy.
SELinux: Class nfc_socket not defined in policy.
SELinux: Class vsock_socket not defined in policy.
SELinux: Class kcm_socket not defined in policy.
SELinux: Class qipcrtr_socket not defined in policy.
SELinux: Class smc_socket not defined in policy.
SELinux: Class bpf not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=0
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
systemd[1]: Successfully loaded SELinux policy in 120.093ms.
systemd[1]: RTC configured in localtime, applying delta of -480 minutes to system time.
systemd[1]: Relabelled /dev and /run in 21.167ms.
kauditd_printk_skb: 30 callbacks suppressed
audit: type=1130 audit(1520572573.740:47): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1520572573.740:48): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520572573.740:49): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1520572573.740:50): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520572573.740:51): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1520572573.740:52): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1305 audit(1520572573.809:53): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:syslogd_t:s0 res=1
audit: type=1130 audit(1520572573.812:54): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1400 audit(1520572573.828:55): avc: denied { map } for pid=741 comm="systemd-sysctl" path="/etc/ld.so.cache" dev="dm-0" ino=1837268 scontext=system_u:system_r:systemd_sysctl_t:s0 tcontext=system_u:object_r:etc_t:s0 tclass=file permissive=0
audit: type=1300 audit(1520572573.828:55): arch=c000003e syscall=9 success=no exit=-13 a0=0 a1=1f337 a2=1 a3=2 items=0 ppid=1 pid=741 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="systemd-sysctl" exe="/usr/lib/systemd/systemd-sysctl" subj=system_u:system_r:systemd_sysctl_t:s0 key=(null)
EXT4-fs (dm-0): re-mounted. Opts: (null)
systemd-journald[740]: Received request to flush runtime journal from PID 1
wmi_bus wmi_bus-PNP0C14:01: WQAA data block query control method not found
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ccp 0000:08:00.2: enabling device (0000 -> 0002)
ccp 0000:08:00.2: enabled
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x790b, Revision ID: 0x59
sp5100_tco: I/O address 0x0cd6 already in use
snd_hda_intel 0000:07:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:07:00.1: Force to non-snoop mode
snd_hda_intel 0000:09:00.3: enabling device (0000 -> 0002)
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input5
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input6
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input7
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input8
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input9
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input10
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
snd_hda_codec_realtek hdaudioC1D1: autoconfig for ALC1220: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:hp
snd_hda_codec_realtek hdaudioC1D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D1: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D1: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D1: inputs:
snd_hda_codec_realtek hdaudioC1D1: Front Mic=0x1a
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input11
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input12
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input13
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input14
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input15
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input16
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input17
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
Adding 33062908k swap on /dev/mapper/fedora-swap. Priority:-2 extents:1 across:33062908k FS
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kauditd_printk_skb: 25 callbacks suppressed
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1520572579.134:77): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-mapper-fedora\x2dhome comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1520572579.358:78): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520572579.361:79): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1520572579.361:80): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520572579.377:81): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1520572579.377:82): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1400 audit(1520572579.408:83): avc: denied { map } for pid=954 comm="restorecon" path="/etc/ld.so.cache" dev="dm-0" ino=1837268 scontext=system_u:system_r:setfiles_t:s0 tcontext=system_u:object_r:etc_t:s0 tclass=file permissive=0
audit: type=1300 audit(1520572579.408:83): arch=c000003e syscall=9 success=no exit=-13 a0=0 a1=1f337 a2=1 a3=2 items=0 ppid=953 pid=954 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="restorecon" exe="/usr/sbin/setfiles" subj=system_u:system_r:setfiles_t:s0 key=(null)
audit: type=1327 audit(1520572579.408:83): proctitle=726573746F7265636F6E002D6946002E2F766172002E2F7661722F6C6962002E2F7661722F6C69622F6468636C69656E74002E2F657463002E2F6574632F737973636F6E666967002E2F6574632F737973636F6E6669672F6E6574776F726B2D73637269707473
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
alx 0000:05:00.0 enp5s0: NIC Up: 1 Gbps Full
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
fuse init (API version 7.26)
nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
sd 10:0:0:0: [sdd] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdd: sdd1
sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 07 6f 4f 00 00 00 80 00
print_req_error: I/O error, dev sdd, sector 124735232
sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 07 6f 4f 88 00 00 68 00
print_req_error: I/O error, dev sdd, sector 124735368
sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 07 6f 4f 00 00 00 08 00
print_req_error: I/O error, dev sdd, sector 124735232
Buffer I/O error on dev sdd1, logical block 15587808, async page read
sd 10:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 10:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current]
sd 10:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
sd 10:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 90 00 00 00 08 00
print_req_error: I/O error, dev sdd, sector 36864
loop: module loaded
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
UDF-fs: warning (device loop2): udf_load_vrs: No anchor found
UDF-fs: Scanning with blocksize 512 failed
UDF-fs: warning (device loop2): udf_load_vrs: No anchor found
UDF-fs: Scanning with blocksize 1024 failed
UDF-fs: INFO Mounting volume 'test', timestamp 2018/03/08 23:54 (1e20)
show_signal_msg: 5 callbacks suppressed
dleyna-server-s[29232]: segfault at 28 ip 00007fbad91f0f66 sp 00007ffc91223e00 error 4 in libdleyna-core-1.0.so.4.0.0[7fbad91ec000+7000]
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
ata3: exception Emask 0x50 SAct 0x0 SErr 0x30802 action 0xe frozen
ata3: irq_stat 0x00400000, PHY RDY changed
ata3: SError: { RecovComm HostInt PHYRdyChg PHYInt }
ata3: hard resetting link
ata3: SATA link down (SStatus 0 SControl 300)
ata3: hard resetting link
ata3: link is slow to respond, please be patient (ready=0)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
ata3: EH complete
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
xhci_hcd 0000:01:00.0: Cannot set link state.
usb usb2-port5: cannot disable (err = -32)
perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79000